10 Like 0 Dislike
GMC Envoy trailblazer control arms replacements and press ball joints
Learn how to flush your cooling system including the radiator, heater core, and engine block. I go though every step to SUPER FLUSH your cooling system completely. My truck's cooling system was really really bad and it needed a good flush. Now the cooling system is filled with brand new coolant and is clean! If your system is old or dirty, that dirt could be clogging holes in hoses, seals, and gaskets so take that into consideration when you do this. Spill free funnel I was talking about: http://amzn.to/2gfZqOn Black Socket Set I use: http://amzn.to/2gFpZJP Hose Clamp Pliers: http://amzn.to/2gg4ORR Large Drain Pan: http://amzn.to/2gFhjTI Universal Antifreeze: http://amzn.to/2fIiNeW Quick Flush your Cooling System: https://www.youtube.com/watch?v=g8YZF5cW7-A Here is How to Test your Cooling System: https://www.youtube.com/watch?v=mHTM3dvpD1M Here is how to Flush your Heater Core: https://www.youtube.com/watch?v=LD2LGkUycQg **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** -Website: https://www.ChrisFixed.com -Facebook: https://www.facebook.com/chrisfix8 -Twitter: https://twitter.com/ChrisFixed -Instagram: https://instagram.com/chrisfixit -Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7 -YouTube Channel: https://www.youtube.com/ChrisFix Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.
Safely and easily remove a ball joint from a car or truck's suspension and steering components. This video reviews the Harbor Freight Ball Joint Separator tool, item #99849, and highlights the do's and don'ts when performing this job. https://www.harborfreight.com/3-4-quarter-inch-forged-ball-joint-separator-99849.html 1. Lubricate the tool to prevent wear and breakage due to friction. 2. Do not use an air impact gun with this tool. A hand wrench or ratchet is more than sufficient for applying the necessary force so as not to damage the tool or potentially create a dangerous situation. 3. Do not necessarily tighten the tool so far as to pop the ball joint loose on its own. This can potentially result in a violent and dangerous outcome, not to mention that it can easily over stress and damage the tool. As per the video, use this tool in conjunction with the traditional method of hitting the steering knuckle with a hammer.
Does SeaFoam actually work in a vehicle? The ultimate test---a 30-year old truck with noisy lifters and horrible oil pressure! This engine sounds like a 1990s era diesel! Did this stuff work? The video will provide proof!
2006 Trailblazer Cambio De Rotulas
In this video I show how I remove and replace the upper ball joints on my 2004 GMC Envoy with about 262,000 miles.
Hope this is helpful.
Envoy Wheel Hub Replacement
Comprehensive Envoy Inner & Outer Tie Rod Removal and Replacement